Description
Hoodisk Industrial mSATA SSD SATA3 3D features and advantages:
• Tough industrial PCB design for industrial application.
• High ECC bits to correct bit errors from flash memory.
• Over 3500 power cycling test for data integrity as power loss.
• Quick and smart flash management to collect garbage data.
• SMART monitor support.
Capacity | Flash | CrystalDiskMark | ATTO | ||
Read (MB/s) | Write (MB/s) | Read (MB/s) | Write (MB/s) | ||
8GB | 8GBx1, TSOP, TSB 15nm | 320 | 100 | 320 | 100 |
16GB | 16GBx1, TSOP, TSB 15nm | 320 | 100 | 320 | 100 |
30/32GB | 16GBx2, TSOP, TSB 15nm | 550 | 175 | 550 | 540 |
60/64GB | 16GBx4, TSOP, TSB 15nm | 550 | 335 | 550 | 540 |
120/128GB | 32GBx4, TSOP, TSB 15nm | 560 | 465 | 550 | 540 |
240/256GB | 64GBx4, TSOP, TSB 15nm | 560 | 465 | 550 | 540 |
480/512GB | 128GBx4, TSOP, TSB 15nm | 560 | 465 | 550 | 540 |
Specifications:
- SATA Interface
- SATA Revision 3.2
- SATA 1.5Gbps, 3Gbps and 6Gbps
- Flash Interface
- Flashtype: MLC
- 1 pcs to 4pcs of TSOP/BGA flash
- Performance
- Read:up to 560MB/s
- Write:up to 465MB/s
- Power Consumption
- Active mode:< 2,485mW
- Idle mode: < 265mW
- DEVSLP mode:<5mW
- TBW(Terabytes Written)
- 544 TBW for 512GB
- Minimum Average Program/Erase Cycles
- MLC: 3,000 cycles
- MTBF
- More than 2,000,000 hours
- Advanced Flash Management
- Static and Dynamic Wear Leveling
- Bad Block Management
- TRIM
- SMART
- Over-Provision
- Firmware Update
- SmartZIP
- Low Power Management
- DEVSLP Mode (Optional)
- DIPM/HIPM Mode
- Temperature Range
- Operation:0°C~70°C
- Storage:-40°C~85°C
- RoHS Compliant